The CANABLOX® XIAO MCU Module Carrier CX-XIAO-S adapts a Seeed Studio XIAO module to the CANABLOX® System. The module is available in the "S" form factor (Single Slots) and only connects the I2C bus. The module can provide 3.3V for your the CANABLOX® setup if it connects to a 5V supply (USB host computer port or 5V charger). The maximum current drawn from your CANABLOX® setup shouldn't exceed 150mA in this configuration. If you require a higher current on the 3.3V I2C bus, please use a CX-INJECT-S power injector module together with a beefier 3.3V power supply (e.g. CX-DCDC-S module).
This is in the bag:
1 x CANABLOX® module
1 x male pin header 4-pin
1 x CANABLOX® I2C Cable 5cm
Note:
Through-Hole (TH) connectors, like the I2C pin header or screw terminals, are included but not factory assembled.
The CANABLOX® ecosystem
CANABLOX® is a modular, clean, stackable ecosystem that replaces the chaos of traditional prototyping with I2C-connected building blocks.
CANABLOX® is not just a hobby tool; it’s a stepping stone from prototype to finished product. With over 60 modules envisioned, from environmental sensors to serial bridges and audio applications, CANABLOX® becomes a platform, not just a product.
Every CANABLOX® module connects directly to a sturdy baseplate or standardized cables, letting you build solid, real-world systems - without the clutter.
All modules use standardized CANABLOX® slot sizes and can be connected either through 4-pin JST-SH cables (compatible with Qwiic and Stemma QT) or by direct mounting onto the baseplate with headers. Every baseplate includes I2C headers (not assembled) and mounting hardware.
Baseplate sizes:
Layout examples:
Reviews
There are no reviews yet.