2.4 inch ESP32 CYD Display Module with resistive touch screen

The "Cheap Yellow Display" ESP32-2432S024R (2.4 inch ESP32 CYD) combines a 2.4-inch IPS colour touchscreen (resistive) with an ESP32-WROOM-32E development board. Use it to build a Wi-Fi sensor dashboard, a home automation control panel, a data logger with a local display, or a custom interface for an embedded project.

The 240x320 display uses an ILI9341 controller and supports 16-bit RGB565 colour. The resistive touchscreen responds to pressure from a fingertip or a compatible stylus (included). The onboard ESP32 runs your application and provides Wi-Fi and Bluetooth connectivity.

• Model ESP32-2432S024R with a 2.4-inch resistive touchscreen
• 240x320 TFT LCD with ILI9341 controller and up to 65,536 colours
• ESP32-WROOM-32 module with a dual-core processor running at up to 240MHz
• 4MB flash memory and 520KB SRAM
• Integrated 2.4 GHz Wi-Fi and Bluetooth
• USB-C for 5 V power and firmware upload
• microSD card slot for graphics, fonts and data logging
• Onboard RGB LED, light sensor and backlight control
• Audio amplifier and connector for an external speaker
• UART, expansion GPIO and a connector for a DHT11 temperature and humidity sensor
• Lithium battery connector, onboard charging circuit and battery power switch
• BOOT and RESET buttons
• Board dimensions 74.4x42.9mm with four mounting holes on 68.0x36.5mm centres

Develop your application with Arduino IDE, ESP-IDF or MicroPython. Use the ESP32-2432S024R pin assignments when configuring the display, touch input and onboard peripherals.