Troubleshooting

Common ground problems are among the most confusing issues in Arduino, ESP32, ESP8266, RP2040 and sensor projects. A circuit may look correct, the code may compile, and every module may have power, but the project still behaves randomly. Typical symptoms include sensors returning nonsense values, relays triggering unreliably, servos twitching, displays flickering, serial communication failing, […]

Using millis() instead of delay() is one of the most important steps in writing better Arduino, ESP32, ESP8266, RP2040 and CANABLOX projects. It allows the sketch to keep running while it waits for a timed event. But many users run into a second problem: they replace delay() with millis(), and the project still does not

WS2812B, NeoPixel and similar addressable RGB LEDs are extremely popular in Arduino, ESP32, ESP8266, RP2040 and decorative electronics projects. With only one data pin, a microcontroller can control many LEDs individually. But addressable LEDs can also be frustrating. A strip may flicker, flash randomly, show the wrong colors, work only sometimes, or behave perfectly with

Character LCD displays such as 1602, 2004 and 1604 modules are often used in Arduino, ESP32, ESP8266, RP2040 and CANABLOX projects. They are simple, readable and inexpensive. But one frustrating problem appears again and again: the LCD works at first, then later shows strange characters, random symbols, missing letters or corrupted text. This can be

Relay modules are commonly used to switch lamps, pumps, fans, solenoids, motors and other external loads from Arduino, ESP32, ESP8266, RP2040 and similar microcontroller boards. With a classic 5V Arduino Uno, many relay modules appear to work easily. But when the same relay module is connected to an ESP32, it may not switch at all,

One of the biggest mistakes in Arduino, ESP32, ESP8266, RP2040 and sensor projects is assuming that every problem is a software problem. The sketch does not work, so the first reaction is to change libraries, rewrite functions, copy another example, reinstall the IDE or ask why the code is wrong. Sometimes the code really is

ESP32 boards are powerful, inexpensive and extremely useful for WiFi, Bluetooth, IoT, sensor and display projects. But they are also more demanding than simple 8-bit Arduino boards when it comes to power supply quality. One of the most common ESP32 problems is a random reset, often with a message such as “Brownout detector was triggered”

The Serial Monitor is one of the most useful troubleshooting tools in Arduino, ESP32, ESP8266, RP2040 and CANABLOX projects. It can show sensor readings, debug messages, error codes, boot messages and program status. But sometimes the Serial Monitor shows only strange symbols, random characters, unreadable text, question marks or mixed readable and unreadable output. This