CANABLOX® 10-Channel GPIO Status Indicator Module (CX-INDICA-MV)

The CANABLOX® 10-Channel GPIO Status Indicator CX-INDICA-MV can show the logic state (high or low) for up to 10 signals (3.3V logic level - absolute maximum 3.8V; measured to GND) on its 10 LEDs. The input impedance of every channel is 1Megaohm, and the required input current to read "high" is only about 0.0025mA.

The I2C bus connection is required to supply power to the module.

This is in the bag:
1 x CANABLOX® module
1 x male pin header 4-pin
1 x CANABLOX® I2C Cable 10cm

Note:
Through-Hole (TH) connectors, like the I2C pin header or screw terminals, are included but not factory assembled.

The CANABLOX® ecosystem

CANABLOX® is a modular, clean, stackable ecosystem that replaces the chaos of traditional prototyping with I2C-connected building blocks.

CANABLOX® is not just a hobby tool; it’s a stepping stone from prototype to finished product. With over 60 modules envisioned, from environmental sensors to serial bridges and audio applications, CANABLOX® becomes a platform, not just a product.

Every CANABLOX® module connects directly to a sturdy baseplate or standardized cables, letting you build solid, real-world systems - without the clutter.

All modules use standardized CANABLOX® slot sizes and can be connected either through 4-pin JST-SH cables (compatible with Qwiic and Stemma QT) or by direct mounting onto the baseplate with headers. Every baseplate includes I2C headers (not assembled) and mounting hardware.

Baseplate sizes:

Layout examples: