Driver, Converter, Interface Archives - Page 2 of 3

3 x Logic Level Converter 4-Channel 3.3V-5V
C$2.59
The common Logic Level Converter design relies on a N-channel MOSFET and 10k pull-up resistors and covers logic level conversion between 1.8V-3.3V-5V. Set of 3.

Add to cart
4-20mA to Voltage Converter (0-3.3...10V)
C$2.98
Interface a current loop signal to the analog input of any microcontroller. Adjustable endpoints.

Add to cart
ADS1115 ADC Module 4-Channel 16-Bit I2C
C$4.95
ADS1115 ADC Module is a precise, low-power, 16-bit, I2C-compatible, analog-to-digital converter (ADC) for 2 to 5.5V operation.

Add to cart
Allegro A3967 Motor Driver (stepper) Module Max
C$9.95
A3967 motor driver with built-in translator. Offers microstepping control in a compact format. Ideal for robotics and CNC.

Add to cart
16-Channel 12-bit PWM Servo Driver PCA9685
C$8.50
Servo Driver PCA9685 cascadable PWM module with up to 992 outputs and adjustable frequency to 1.6kHz. Ideal for LED arrays or servo controls.

Add to cart
CD74HC4067 Analog Multiplexer / Demultiplexer 16-Channel
C$3.39
CD74HC4067 Analog Multiplexer connects 1 of 16 analog inputs to the output, or 1 input to 1 of 16 outputs.

Add to cart
Micro-SD Memory Card Adapter for Arduino with 3.3V-5V converter
C$1.80
On-board level converter to interface a Micro-SD card (3.3V) with a 5V microcontroller like Arduino UNO or Nano.

Add to cart
I2C Adapter for Character LCD - PCF8574 (A)
C$2.69
Backpack module for our 2×16 and 4×20 LCD character displays. Selectable I2C addresses allow to connect up to 8 displays to the same I2C bus.

Add to cart
2-Channel Logic Level Converter 3.3V-5V with 3.3V LDO
C$1.95
Most reliable design with N-channel MOSFET and 10k pull-up resistors for logic level conversion between 3.3V and 5V. Only requires 5V supply (3.3V LDO on board).

Add to cart
ST-LINK V2 USB Programmer - Debugger
C$7.90
USB dongle-style programmer and debugger for microcontrollers developed by STMicroelectronics.

Add to cart
USB to RS485 Interface Adapter - 2 Wire - CH340
C$2.45
USB to RS485 adapter with CH340 chip. Enables reliable two-wire serial communication in industrial and automation environments.

Add to cart
CH340 USB UART Interface for Communication
C$3.39
USB UART module with CH340 chip. Supports both 3.3V and 5V logic. A reliable choice for serial communication with microcontrollers.

Add to cart
USB I2C Interface Adapter CH341T - 3.3V and 5V
C$5.99
USB to I2C/UART interface using CH341T chip. Acts as I2C master or standard TTL UART. Versatile communication tool for development.

Add to cart
CANABLOX® 16-Channel GPIO Expander I2C (CX-MCP23017-MH)
C$13.00
The CANABLOX® 16-Channel GPIO Expander CX-MCP23017-MH provides 16 general I/O digital ports. Each pin can be configured individually as input or output.

Add to cart
CANABLOX® 2:1 Channel I2C Bus Multiplexer (CX-MUX-S)
C$12.00
The CANABLOX® 2:1 Channel I2C Bus Multiplexer CX-MUX-S uses a TCA9546A bus switch that lets a single master communicate with 2 devices that share the same I²C address. CX-MUX-S uses the TCA9546A channels 0 and 1 (on the module A and B), making it a 2:1 I2C multiplexer.

Add to cart
CANABLOX® 4-Channel 12-Bit DAC I2C (CX-MCP4728-S)
C$12.00
The CANABLOX® 4-Channel 12-Bit DAC CX-MCP4728-S provides four independent 12-bit DAC outputs with per-channel EEPROM to store settings (code, reference, gain, power-down).

Add to cart
CANABLOX® 4-Channel 16-Bit ADC I2C (CX-ADS1115-S)
C$10.00
The CANABLOX® 4-Channel 16-Bit ADC CX-ADS1115-S can capture 4 analog voltage values between 0 and 3.3V connected between GND and its inputs. The maximum resolution in this mode is 0.25mV per bit. The module comes in the CANABLOX® Form Factor “S” (Single Slot).

Add to cart
CANABLOX® Dual UART Serial Interface Module I2C (CX-2UART-S)
C$27.00
The CANABLOX® Dual UART Serial Interface CX-2UART-S is an I2C to serial converter with 2 Channels in the CANABLOX® Form Factor “S” (Single Slot).

Add to cart
CANABLOX® I2C External Power Injector (CX-INJECT-S)
C$7.50
The CANABLOX® I2C External Power Injector CX-INJECT-S will help you to provide more power to the I2C bus than your host (MCU) can deliver.

Add to cart
CANABLOX® Single-Channel 12-Bit DAC I2C (CX-MCP4725-S)
C$9.00
The CANABLOX® Single-Channel 12-Bit DAC CX-MCP4725-S is based on the Microchip MCP4725 which provides a precise, continuously adjustable analog output voltage and includes an on-chip EEPROM to store output settings.

Add to cart

Driver, Converter, Interface

Add or remove tag filters:

3 x Logic Level Converter 4-Channel 3.3V-5V

4-20mA to Voltage Converter (0-3.3...10V)

ADS1115 ADC Module 4-Channel 16-Bit I2C

Allegro A3967 Motor Driver (stepper) Module Max

16-Channel 12-bit PWM Servo Driver PCA9685

CD74HC4067 Analog Multiplexer / Demultiplexer 16-Channel

Micro-SD Memory Card Adapter for Arduino with 3.3V-5V converter

I2C Adapter for Character LCD - PCF8574 (A)

2-Channel Logic Level Converter 3.3V-5V with 3.3V LDO

ST-LINK V2 USB Programmer - Debugger

USB to RS485 Interface Adapter - 2 Wire - CH340

CH340 USB UART Interface for Communication

USB I2C Interface Adapter CH341T - 3.3V and 5V

CANABLOX® 16-Channel GPIO Expander I2C (CX-MCP23017-MH)

CANABLOX® 2:1 Channel I2C Bus Multiplexer (CX-MUX-S)

CANABLOX® 4-Channel 12-Bit DAC I2C (CX-MCP4728-S)

CANABLOX® 4-Channel 16-Bit ADC I2C (CX-ADS1115-S)

CANABLOX® Dual UART Serial Interface Module I2C (CX-2UART-S)

CANABLOX® I2C External Power Injector (CX-INJECT-S)

CANABLOX® Single-Channel 12-Bit DAC I2C (CX-MCP4725-S)