nanoESP32-C6-N16 Development Board with 16GB Flash Wi-Fi 6 + BT BLE

The NanoESP32-C6-N16 is a compact ESP32-C6 development board with 16 MB of flash, two USB-C ports, and pre-soldered pin headers. It is ready to plug into a breadboard for wireless prototyping and embedded development.

One USB-C port connects directly to the ESP32-C6 for native USB Serial/JTAG. The second connects through an onboard CH343 USB-to-UART bridge for serial programming and monitoring. The board also has a full-colour RGB LED and separate BOOT and RESET buttons.

• Processor: 32-bit RISC-V, up to 160 MHz
• Memory: 512 KB SRAM and 16 MB flash
• Wireless: 2.4 GHz Wi-Fi 6, Bluetooth Low Energy, and IEEE 802.15.4 for Thread and Zigbee development
• USB connections: two USB-C ports for native USB and USB-to-UART
• Onboard WS2812B RGB LED connected to GPIO8
• Pin headers: factory installed
• Board footprint: 53x28 mm