Solderless breadboard 830 Tie Points – Adhesive Back – Detachable Power Lanes

Description

Perm. Breadboards
Type	BB 400	BB 830	BB 170 set of 4	Arduino UNO BB, set of 2	ArduEZ powered BB
# of tie points	400	830	4 x 170	275	1042
Fits Power Supply with UART Module (26867)
Part # (Go to)	26058	26059	26565	26695	26772

This is the larger Solderless breadboard 830 tie-points. The back side has an adhesive pad on it, to stick the breadboard to any flat and clean surface.

The 2 power lanes are detachable, and all parts (main panel and power lanes) are tongued and grooved. This way, you can build your own supersized breadboard.

Each board is 165 x 55 mm x 8.5 mm and can accept solid patch wires with a diameter of 0.3 to 0.8 mm diameter (AWG 20-29).

The maximum current per lane must not exceed 5A, the insulation voltage between the lanes is 300V, and must not be exceeded as well.

Check out the CANADUINO® Breadboard Power Supply and USB-UART Module:

Note: The images are examples. Depending on the factory who made them, they can look slightly different but always have the same size and provide the same number of tie points.