Soil Moisture Sensor with 45mm Electrodes, analog and digital (trigger) output, adjustable sensitivity.
Soil Moisture Sensor Arduino compatible analog and digital output kit contains the soil sensor electrode, and the sensor/trigger board. The power supply should be chosen accordingly to the connected micro controller, because the output voltage is about the supply voltage. It means, depending on your micro controller, the power supply should be for example 5V for an Arduino Uno, or 3.3V for an Arduino Due or Zero.
Please see the schematic; it shows the trigger circuit which is pretty much the same for all similar looking sensor boards. Only the analog output is not shown on the drawing, but the analog output is just the straight signal from the sensor electrodes.
- Operating Voltage (max.) 2- 36V
- Operating Voltage (recommended) 1.8 / 3.3 / 5.0V
- Trigger output with adjustable sensitivity.
- Max. output (sink) current 16mA.
- Dimension sensor60x 20mm, 1.9g
- Dimension PCB 15 x 31 x 7 mm, 2.0g