OLED Display 0.96 inch 128×64 with SPI interface – 3-5V
CAD 5.95
Backorder not available during sale.
No free item if only 2 left in stock. |
- Description
- Reviews (0)
Description
This tiny 128×64 Pixel OLED display shows white pixels on a dark blue background. It communicates through its SPI interface with any microcontroller platform for example Arduino or ST32. Please watch the YouTube video (link below) to see how it works.
Thanks to its operation and logic level voltage of 3-5V, this Display hooks up to any Arduino board without voltage compatibility issues.
These displays can come with an SSD1306 or SH1106 controller. Both models are very similar, but not identical. We recommend a library that supports both (see below). Then you can easily figure out which setting to use.
- Shows characters and graphics.
- Arduino library is available.
- 128 x 64 pixel, white/blue
- PCB size: 27 x 28 mm
- Screen size: 22 x 12 mm (0.96 Inches)
- Power consumption: <40mW
- Data interface: SPI
- This Display has no Touch-Function.
SPI Interface Pinout:
D0 = clock
D1 = MOSI
DC = data/command
CS = chip select
VCC = 3.3 – 5V
RES = reset
GND = ground
Note: We recommend not using the library from Adafruit due to its incompatibility with the SH1106 controller. Here is a better library, supporting different controller models and definitely works with both controller types:
Be the first to review “OLED Display 0.96 inch 128×64 with SPI interface – 3-5V”
You must be logged in to post a review.
Related products
-
SH1106 or SSD1306 OLED I2C 128×64 1.3 inch 3-5V
5.00 out of 5 -
ST7789 TFT IPS Display – 1.3 inch – 240×240 pixel – SPI Interface
5.00 out of 5 -
LCD12864 128×64 Graphic Display SPI – green yellow – ST7920
0 out of 5 -
Acrylic Enclosure for LCD 1602 16×2
5.00 out of 5 -
8-digit serial LED 7-segment display MAX7219 – 9.5mm
0 out of 5 -
-
4 digit LED 7-segment display, serial interface, TM1637
5.00 out of 5 -
Reviews
There are no reviews yet.