UNIVERSAL-SOLDER Electronics Ltd

Lithium Battery Gauge LED for 1-8 cells in series – GREEN LED display

(1 customer review)

$ 3.40

In stock

3 - 9 5%
10 - 19 10%
20 - 49 12.5%
50 - 999 15%
Added to wishlistRemoved from wishlist 1
SKU: 26455 Categories: ,
Your recently viewed items

This little LED battery gauge shows the charge in 25% steps with 4 bars and a red frame.

The number of connected cells can be selected by closing the corresponding solder jumpers on the back side.

The maximum operating voltage is 34V, the current about 20mA.

Dimensions are shown in the pictures.

This module is available with BLUE and with GREEN LED bars.

Specification: Lithium Battery Gauge LED for 1-8 cells in series – GREEN LED display

EAN

4260474034550

Manufacturer

UNIVERSAL-SOLDER

Brand

CANADUINO

1 review for Lithium Battery Gauge LED for 1-8 cells in series – GREEN LED display

5.0 out of 5
1
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. m.p (verified owner)

    This gauge is bright and easy to read. I was at first thrown a bit by the red outline – despite the description it had me thinking there was something wrong, but it’s just the colour used for the battery outline.

    I have only used it so far to check single 18650 cells and it gives roughly the same reading as the charger I use. It is very easy to use – +ve to +ve, -ve to -ve, and you get a reading right away. I saw a current draw of 18mA with a fully charged cell and all four bars lit.

    One thing to note – check the dimensions (43.5x20mm). I didn’t and it’s larger than I expected but fortunately that worked out in my case.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Lithium Battery Gauge LED for 1-8 cells in series – GREEN LED display
    Lithium Battery Gauge LED for 1-8 cells in series – GREEN LED display

    $ 3.40

    UNIVERSAL-SOLDER Electronics Ltd
    Logo
    Enable registration in settings - general
    0
    Shopping cart