STC-3008 is a Dual Function Controller for Temperature and Humidity.
Typical applications are food and material storage where besides the temperature also the humidity needs to be within certain limits.
Settings are stored even when power is interrupted.
– Temperature sensor NTC 10K, length 1m
– Measuring range -20 to 80°C and 0-100%RH
– Display resolution 0.1°C or %
– Sensor accuracy ±1°C or %
– Power supply 12V DC
– Power consumption <3W
– Operating humidity (relative) 20 to 85%
– Relay outputs 10A/240VAC
The size of the front panel is about 75 x 34.5mm
The size of the base equals the front panel opening size and is about 70 x 28mm
The module is about 85.5mm deep (measured behind the front panel)
To set temperature range press and hold UP 1 button until the display flashes (about 3 seconds), then press UP 1 or DOWN 1 button to adjust the LOW (start) setpoint. Press and hold DOWN 1 button until the display flashes (about 3 seconds), then press UP 1 or DOWN 1 button to adjust the HIGH (end) setpoint.
To adjust the humidity range, do the same with buttons UP 2 and DOWN 2.
To reset the controller to factory defaults, press and hold DOWN 1 and DOWN 2 buttons for about 3 seconds.
Specification: CANADUINO STC-3028 Temperature Humidity Controller 12V
Does not apply.