CANADUINO DCF77 Atomic Clock Receiver Module 77.5kHz for Europe

CAD 18.77

CANADUINO DCF77 Atomic Clock Receiver Module 77.5kHz for Europe

348 in stock

Buy at least 2 for CAD 16.89
Buy at least 6 for CAD 15.02
Buy at least 11 for CAD 13.14
SKU: 26020 Category: Atomic Clock AM Receiver


The new version of the UNIVERSAL-SOLDER / CANADUINO atomic clock receiver module is the most advanced and best-equipped AM Atomic Clock Receiver module available today.

We designed this product around the awesome receiver chip from Micro Analog Systems (Finland), just like the old module was. It means, this module is in particular designed for the use with microcontrollers in an operating voltage range of 2 to 15V, and standard logic levels 3.3 / 5V.

This is new:
– We added an ultra-quiet LDO voltage regulator, to offer a wide supply voltage range of up to 15V.
– We added 4 LEDs to show the status of power, AGC, power-down mode, and output.
– We added drivers for the output signal, and an inverted output, both capable of driving up to 15mA.
– We modified the antenna design for better reception with an even shorter antenna stick.

The newly designed, fine-tuned 77.5kHz antenna guarantees even better reception than the old model.

This module can be used to receive the atomic clock signal transmitted by:
– DCF77 (Germany)

The advantages compared to other modules:
– wide operating voltage range 2* to 15V
– 60 mm tuned high-gain, high-Q antenna
– current consumption <100µA (LEDs off)
– super high sensitivity of 0.4V (RMS)
– power down control pin
– fast start-up
– AGC control on/off

This kit needs some soldering. Crystal, antenna, and pin header are not assembled for more flexible use. So is it possible to use a different crystal and different antenna, for example for a 40kHz setup for Japan, or a DCF77 setup for Europe.

If you don’t want to develop your own project, you can find many projects online, using 60kHz atomic clock receiver.

From Arduino data logger to Nixie Tube clocks. There are also libraries for Arduino IDE and other development sources online.

We highly recommend reading the official Wikipedia article about DCF77 time signal.

Download a detailed datasheet for the MAS6180C receiver IC.

Documentation CANADUINO Atomic Clock Receiver Kit

See the craziest DCF77 Atomic Clock project ever: Arduino DCF77 Analyzer Clock MK2 from oliverb on

Documentation for the old model is available here.

* The module will work as expected with a voltage of as low as 2V. But the LEDs might not work as expected. We recommend a minimum voltage of 3V.

Troubleshooting 101:
In 99.9% of the cases when the module looks dead and the LEDs won’t come off, you missed reading the datasheet.

Additional information

Weight 0.04 kg
Dimensions 5 × 5 × 20 mm





CANADUINO or other


There are no reviews yet.

Be the first to review “CANADUINO DCF77 Atomic Clock Receiver Module 77.5kHz for Europe”