Parts Kit for “Arduino on a Breadboard” Projects with ZIF socket (100% compatible with Arduino)
Discounts available when logged in.
Arduino parts for your Breadboard Project. The most inexpensive way to start your Arduino project. The included ZIF socket avoids bending or breaking of your Arduino pins. Just take a Breadboard or assemble your parts “flying” to get the basic function of an Arduino Uno; flash your program on the included controller chip using a USB-UART adapter like our CH340 interface, and build your own project! You will need a power supply of 4.5 to 5.5 V, like a USB charger or a pack of 3 AA or AAA batteries.
Included in this Arduino breadboard parts kit are the following basic parts to start any Arduino project based on ATmega328P-PU:
Included in the kit is:
1 x MCU ATmega328P-PU with Bootloader for Arduino installed
1 x ZIF28 socket for MCU
1 x Crystal 16MHz
1 x Capacitor 100nF blocking capacitor
1 x Resistor 10k (pull-up for reset line)
1 x Resistor 330-1000 Ohm (LED current limiter)
1 x LED 3mm (different colors)
1 x Reset button
The schematic is shown in the pictures.
We recommend our CH340 USB-TTL adapter for programming your Arduino with Arduino IDE using a USB connection to the host computer:
2 x Load capacitor for crystal (16-22pF)
We have the same kit with a DIP socket instead of the ZIF socket, in case you want to save some cents. Alternatively, we have a similar kit including a solderless breadboard 400 or 830 and a voltage regulator module.
Specification: Parts Kit for “Arduino on a Breadboard” Projects with ZIF socket (100% compatible with Arduino)