4 Digit 1 Inch Clock DIY Soldering Kit – with Alarm – Temperature – Night Dimming

(1 customer review)

CAD 8.50

>> Login to see your personal Discounts
>> Please read Important Information

12 in stock

SKU: 26544 Category:

Description

Easy assembling of all parts by following the provided pictures and the documentation included with the kit (basically matching parts to the positions on the PCB).

The finished clock will show the time and room temperature. It comes with an alarm function and an automated dimming function to lower the brightness at night.

We believe it shows time in 24H mode only and temperature in Celsius.

A CR1220 backup battery keeps the time also if there is no main power supply is available.

Display Dimensions: 97 x 34 mm
PCB Dimensions: 98 x 36 mm

The clock is controlled by an 80C51 compatible microcontroller in combination with a DS1302 real-time-clock chip.

Operating instruction (machine translated from the included Chinese manual):
1. Press the No. 1 key once, and the No. 2 display area will flash: it means that the minutes of the time are adjustable. At this time, press the No. 2 button to adjust the minutes of the time.
2. Press the No. 1 button again, the No. 1 display area flashes: the hour of the time is adjustable, at this time, press the No. 2 button to adjust the time of the time.
3. Press the No. 1 button again, and the No. 2 display area flashes: it means that the minute of the alarm clock can be adjusted. At this time, press the No. 2 button to adjust the minute of the alarm clock.
4. Press the No. 1 button again, and the No. 1 display area flashes: it means that the alarm clock can be adjusted. At this time, press the No. 2 button to adjust the alarm time.
5. Press the No. 1 button again, the No. 1 display area and the No. 2 area will either display all 1s (indicating on) or all 0s (indicating off). At this time, press the No. 2 button to turn on or turn off the light control. (Light control means that the display brightness can be changed according to the strength of the environment).
6. Press the No. 1 button again, the No. 1 display area and the No. 2 area will either display all 1s (indicating on) or all 0s (indicating off). At this time, press the No. 2 button to turn on or off the alarm clock function.
7. Press-down button 1 again to return to the normal display interface.
8. When the alarm is sounding, press button 2 to turn off the alarm.

Troubleshooting of common issue:
If the clock is not running right away, remove the power supply and the backup battery and wait for 20s. Then plug the main power back in and after that the backup battery.

Additional information

Brand

CANADUINO

ean

4260474035441

1 review for 4 Digit 1 Inch Clock DIY Soldering Kit – with Alarm – Temperature – Night Dimming

  1. stacey stadnyk (verified owner)

    Good Kit – Easy to assemble – only Chinese language instructions -ve 1 star. All Parts are of good quality. An improvement to the kit would be a knowledge check or theory of operation to learn why it does what it does ect.

  2. UNIVERSAL-SOLDER

    These kits are easy to assemble since it only requires matching of the parts with the positions on the PCB – something that’s the same in either Chinese or English. Other than this, the function is explained right in the product description (I agree, the translation is terrible).

Add a review